The practical and robust design of the Zen-O™ provides a high degree of ease of use and low running costs. Zen-O™ features particularly easy-to-replace molecular sieves. The molecular sieves are a very important part of the device that allows the Zen-O™ to produce oxygen. Whether and when the molecular sieves need to be replaced depends on the environmental conditions and the length of use. It is then important to know that the exchange can be carried out very easily at the patient's home within 5 minutes. Zen-O™ can therefore be used again quickly, which benefits the patient's convenience.
Zen-O™ weighs only 4.66 kg and can generate up to 2 liters of oxygen per minute in both breath-driven and continuous mode. Zen-O™ comes standard with a carrying case, AC & DC power supply and an adjustable trolley for increased patient mobility.
Zen-O™
Portable Oxygen Concentrator is designed for patients with respiratory
conditions such as chronic obstructive pulmonary disease (COPD). Zen-O ™ helps these patients to move more easily and more freely both inside and outside the home. The
unique breath-controlled system tracks the number of breaths at rest
and exertion, so that the patient always receives the right amount of
oxygen.
Delivery Package:
Zen-O Portable Oxygen Concentrator
1 x 12-cell lithium ion battery
220 Volt and 12 Volt adapters
Power cords UK/US/EU
Trolly
Carrying case
Manual
Flow Rate 1 12 Cell Battery 2x 12 Cell Batteries
Pulse 1 Up to 4.0 hours Up to 8.0 hours
Pulse 2 Up to 4.0 hours Up to 8.0 hours
Pulse 3 Up to 3.0 hours Up to 6.0 hours
Pulse 4 Up to 2 .25 hours Up to 4.5 hours
Pulse 5 Up to 2.0 hours Up to 4.0 hours
Pulse 6 Up to 1.75 hours Up to 3.5 hours
Continuous 0.5 LPM to 3.0 hours to 6.0 hours
Continuous 1, 0 LPM to 1.75 hours Up to 3.5 hours
Continuous 1.5 LPM to 1.25 hours Up to 2.5 hours
Continuous 2.0 LPM to 0.75 hours Up to 1.5 hours
Dimensions
(W×D×H) 212 mm × 168 mm × 313 mm (8.3" × 6.6" ×12.3")
Unit weight :
4.66 kg with a 12 cell battery and 5.32 with 2 batteries
Power requirement AC adaptor: 100-240V AC(+/- 10%) 50-60 Hz in,24V DC, 6.25A out DC adaptor: 11.5 - 16V DC in, 19V, 7.9A out
Concentration 87% - 96% on all modes
Maximum oxygen discharge pressure 20.5 psi
Inspiratory trigger sensitivity -0.12cm/H20
Humidity 5% to 93% ± 2% non-condensing
Operating temperature 5°C (41°F) and 40°C (104°F)
Storage temperature -20 °C (-4°F) and 60°C (140°F)
Settings: Adjustable in 0.5 levels from 1.0 to 6.0 in pulse mode and from 0.5 to 2.0 in continuous mode
Sound level 38 dB(A) tested Prüf method 14-1 03/2007 MDS-Hi* 42 dB(A) tested ISO 3744*
Alarm Types Low Oxygen No Breath Detected Battery Empty Service Required
Battery usage Approximately 4 hours with a single battery or 8 hours with 2 batteries at 18 BPM